When you're outfitting a palletizing line conveyor, the goal is to get a complete robotic cell that can start moving your product onto pallets quickly. Both systems here are sold as full palletizing robot assemblies: a robotic arm, motion controller, teach pendant, integrated gripper, and conveyor. Both are also seller refurbished and include custom programming from Best Choice Industrial Services, which creates the program after receiving a pallet of your product. The main decision is whether you want the arm selection of the Fanuc system or the high-payload Nachi arm at a lower listed price.
Quick Verdict
If you value flexibility in arm choice, the Fanuc Palletizing Robotic System at $69,950 is the one to consider. You can match the robot to your load from four arm options. If you want a ready-to-run high-payload system for $10,000 less, the Robotic Palletizing System with the Nachi SH200 at $59,950 gives you a 200 Kg arm with the AX-10 controller.
Comparison Table
| Feature | Fanuc Palletizing Robotic System | Robotic Palletizing System (Nachi) |
|---|---|---|
| Listed price | USD 69,950.00 | USD 59,950.00 |
| Robot arm | R-2000iB (165F/210F) or M-710iC (50Kg/70Kg) | Nachi SH200 |
| Payload | 50Kg, 70Kg, 165Kg, or 210Kg depending on arm choice | 200 Kg |
| Controller | R-30iA motion controller | AX-10 motion controller |
| Included components | Gripper, conveyor, teach pendant | Gripper, pickup conveyor, teach pendant |
| Custom programming | Included | Included |
| Condition | Seller refurbished | Seller refurbished |
Where Each Product Wins
- Fanuc system wins for arm variety. You choose between a refurbished Fanuc R-2000iB in the 165F or 210F version, or an M-710iC in the 50Kg or 70Kg version. That gives you a way to scale the robot to your products before it ships.
- Nachi system wins for price and payload. At a $10,000 lower listed price, you still get a 200 Kg robotic arm. If the load is consistently heavy and you don't need different robot sizes, this system simplifies the choice.
Product Notes
Fanuc Palletizing Robotic System, R-2000iB, M-710iC, Fanuc, Palletizing Robot
This is the higher-priced of the two, and the difference goes toward a wider range of arm configurations. Best Choice Industrial Services lets you specify a refurbished Fanuc R-2000iB (210F or 165F) or an M-710iC (50Kg or 70Kg), paired with the R-30iA control system, cables, and teach pendant. The cell includes a new integrated gripper and conveyor. The limitation is that you need to decide the arm before purchase, and the payload depends entirely on that choice. If you're still settling on your product mix, that extra decision may slow you down. But if you know the envelope, the Fanuc system lines up well with a custom program.
Robotic Palletizing System, Palletizing Robot, Robot, Used Robot, Fanuc Robot
The lower-priced system centers on a refurbished Nachi SH200 arm with a 200 Kg payload and an AX-10 controller. It includes a new integrated gripper and a pickup conveyor, plus the teach pendant and cables. Because there's a single arm, the configuration is more straightforward: you know exactly what payload the robot can handle without choosing among variants. The tradeoff is that you don't get the multiple arm options the Fanuc system offers, so if your products change dramatically, this system may not adapt to those shifts as easily. For a steady, heavy load, however, it provides a direct route to a palletizing conveyor solution.
Final Choice by Use Case
Choose the Fanuc Palletizing Robotic System when your palletizing needs call for a range of payloads-50Kg, 70Kg, 165Kg, or 210Kg-and you want to pick the arm at purchase time. The $69,950 price includes the higher flexibility of four arm options within one system.
Choose the Robotic Palletizing System with the Nachi SH200 when your priority is a 200 Kg payload and the lower listed price of $59,950. It's a good fit for consistent heavy loads where one arm configuration is enough.
