Choosing a clear packaging film usually starts with the machine you feed. Sachet filling lines need a film that seals into small pouches, while horizontal flow wrappers need roll stock cut to your package width. The four rolls here range from a food-grade PE/PET sachet film to three clear BOPP flow-wrapping rolls. Listed prices span USD 89.00 to USD 254.88.
Quick Take
If your machine is a sachet filling and sealing unit, the sachet film roll is the food-grade transparent option to consider. If you need flow wrapper film, the three SFEC rolls are clear, heat-sealable BOPP stock with a 5,905 ft roll length, 1.18 mil thickness, and a 3-inch core. Pick the width that matches your package, then check the price table below.
Listed Price Comparison
| Product | Listed Price | Price Bar |
|---|---|---|
| PE/PET Sachet Film | USD 89.00 | |
| SFEC787 Clear Film Roll | USD 254.88 | |
| SFEC629 Clear Film Roll | USD 198.20 | |
| SFEC708 Clear Film Roll | USD 231.79 |
Decision Matrix
| If your packaging line uses... | Recommended roll |
|---|---|
| Sachet filling and sealing with 8cm film width | Sachet Film |
| Horizontal flow wrapping at 6.29" (160mm) | SFEC629] Clear Heat Sealable Packaging Film Roll |
| Horizontal flow wrapping at 7.08" (180mm) | SFEC708] Clear Heat Sealable Packaging Film Roll |
| Horizontal flow wrapping at 7.87" (200mm) | SFEC787] Clear Heat Sealable Packaging Film Roll |
Product Notes
Packaging Materials PE/PET Film For Sachet Filling Sealing Packing Machine 3KG
This clear roll is sold as a 3kg PE/PET composite film with an 8cm width and a food grade marking. That makes it a practical starting point for a sachet filling and sealing machine where you need transparent material without committing to a full flow-wrapping setup. It is also the lowest listed price in the group, which helps if you are testing film on a sachet line. The trade-off is that you need to work from weight and width when estimating run length for your pouch size and sealing temperature.
SFEC787] Clear Heat Sealable Packaging Film Roll - Clear 7.87" (200mm) Wide
This BOPP roll is the widest option of the three flow-wrapper films, at 7.87 inches (200mm). It is designed for larger product packaging on horizontal flow wrappers, with heat-sealable clear film that lets the product show through. Choose this roll when your package width demands the full 200mm width. The limitation is the other side of that width: if your pouches run narrower, the extra film area is wasted and you are paying for the widest listed roll in the SFEC group. It also carries a California Prop 65 warning, so that is worth noting if your facility tracks such notices.
SFEC629] Clear Heat Sealable Packaging Film Roll - Clear 6.29" (160mm) Wide
The 160mm SFEC629 is the narrowest BOPP roll here, so it suits medium-size product packaging and keeps your film closer to the package width. Its clear, heat-sealable construction and 5,905 ft roll length make it a steady fit for horizontal flow wrappers and compatible vertical form-fill-seal machines. The catch is that a 160mm roll will not cover packages that need a wider sheet, so if your line occasionally runs larger items, you would need to switch to the 180mm or 200mm roll.
SFEC708] Clear Heat Sealable Packaging Film Roll - Clear 7.08" (180mm) Wide
At 7.08 inches (180mm), this SFEC708 sits between the 160mm and 200mm BOPP rolls. It is designed for medium-to-larger product packaging and gives you more width than the 160mm roll without jumping all the way to 200mm. For a packaging line that handles a range of medium-to-large products, the 180mm width is a balanced middle choice. The limitation is that it is not as wide as the 200mm roll, so the largest packages in that group may still require the SFEC787.
Final Recommendation by Use Case
For sachet filling, the sachet film is the clear starting point. For flow wrapping, match the roll to your package width: choose the narrowest SFEC roll for smaller packages, the mid-width roll for medium-to-larger packages, and the widest roll for the largest packages. If you want one roll that splits the difference, the SFEC708 is the middle option between the narrowest and widest SFEC rolls.
