Choosing among packaging spare parts and consumables means deciding what kind of job you are actually solving. One listing offers a low-cost cardboard display box for small items, another provides disposable nozzle tubes, and two are machine-oriented: genuine Hypertherm plasma deflectors and a large R.A Jones stainless steel puck lot. The price spread is wide, but the bigger difference is in what each part is meant to do.
Quick Take
If you are maintaining a plasma cutter, the Hypertherm deflector lot is the direct consumable option. If you are assembling or repairing a filling/packaging/sealing machine, the R.A Jones puck lot is the larger spare-parts purchase. If you are just looking for packaging supplies, the pull-out cardboard box and the empty nozzle tubes cover display and disposable dispensing needs.
Listed-Price Comparison
The table below puts the four listings side by side using the listed prices and the same price-scale bars.
| Product | Listed price | Price bar |
|---|---|---|
| Hypertherm 120519 Deflector PMX1100 (Lot of 16) | USD 192.00 | |
| R.A Jones Stainless Steel Puck Parts (Huge Lot) | USD 799.95 | |
| Pull-Out Nail/Jewelry Cardboard Gift Box | USD 1.00 | |
| Disposable Empty Nozzle Tubes (0.3 ml Head, 10 pcs) | USD 15.98 |
The two machine-facing parts sit at the upper end, while the display box and nozzle tubes sit at the lower end.
Decision Matrix
- If your job is plasma cutting, the Hypertherm deflector lot gives you a batch of genuine consumables in one order.
- For machine assembly or repair, choose the R.A Jones puck lot when you are replacing puck parts on a filling/packaging/sealing machine and you know the puck assembly matches.
- For a display piece, the pull-out box works as a simple gift or jewelry presentation piece.
- For dispensing small amounts, the empty nozzle tubes are the practical packaging pick.
Before choosing, match the model or size reference in the listing to your own equipment. That matters most for the plasma deflector and the puck assembly, where fit determines whether the part is useful.
Hypertherm 120519 Deflector (PMX1100) - Lot of 16
This listing is a new lot of 16 genuine Hypertherm deflectors, listed at USD 192.00. The condition is listed as new, and the origin is listed as the United States. If you own PMX1100 plasma equipment, the reason to pick this lot is inventory depth: you get a batch of genuine deflectors rather than a single piece. The deflector type and the PMX1100 compatibility are the key decision points. One thing to check before ordering is whether your torch matches the PMX1100 reference; this deflector is a plasma-cutting consumable, not a packaging-machine spare part.
R.A Jones Stainless Steel Puck Parts - Huge Lot
The price listed for this huge lot is USD 799.95, which makes it the largest spend in this group. The part set is described as stainless steel puck parts for filling, packaging, and sealing machines, with the R.A Jones model 107901164 used to identify it. The benefit is that one listing can supply a substantial lot of puck parts for machine maintenance. The trade-off is fit: you need to know your machine takes this style of puck assembly before committing to a large lot, and the listing itself advises buyers to make sure the parts will work.
Pull-Out Cardboard Gift Box for Nail/Jewelry Display
At USD 1.00, this is the lowest listed price in the group. It is described as a pull-out nail/jewelry box made of paper/cardboard, in white, measuring 4-inch by 4-inch by 2-inch, and the condition is listed as new with tags. The draw is simplicity: if you need a small display box for gifting or retail presentation, this is a lightweight packaging consumable you can buy in bulk. The trade-off is that this is a presentation piece, not a machine spare; it provides packaging instead of equipment maintenance, and it is a plain white box rather than a custom-printed piece.
Disposable Empty Nozzle Tubes (0.3 ml Head Size)
At USD 15.98, this listing gives you 10 pieces of disposable packaging tubes with empty nozzle heads, in the 0.3 ml head size shown in the listing. The description also notes a 0.5 ml size option. The reason to choose this option is convenience for one-time-use packaging: the tubes come in sterilized packaging and are meant to be used once rather than refilled. The catch is that the listing does not include metal needles, so if your task needs a needle tip, you will have to get that separately.
Final Recommendation by Use Case
If you need a plasma cutter consumable, the Hypertherm deflector lot is the direct fit. If you are repairing a filling/packaging/sealing machine puck assembly, the R.A Jones lot is the one to match to your machine. If the job is packaging presentation, the pull-out cardboard box is the simple display piece. If you want a disposable dispensing tube for one-time use, the empty nozzle tubes are the small-quantity consumable option.
