When you are planning packaging automation line integration, the first question is not which machine is cheapest - it's where your line actually loses time. Do you need to seal and print bags at high speed? Control exact weight before a bag is formed? Or apply a clean shrink sleeve to bottles after filling? The four options here represent three very different stations, and the right one depends on the bottleneck you are solving.
Quick Take
At the component level, the Magnum Systems Weigh Controller is the most affordable single piece of equipment, while the Automatic Steam Shrink Labeling Machine is the heaviest investment and the only new unit among these four listings. The two Autobag HS-100 Excel systems are effectively the same described bagging-and-printing solution, with the price difference between them acting as the main decision point.
Listed Price Comparison
| Product | Listed price | Price bar | What it brings to a packaging line |
|---|---|---|---|
| Automatic Steam Shrink Labeling Machine 220V 3PH with Boiler | USD 6,384.80 | Steam shrink-sleeve labeling station for bottle lines | |
| Digital Packaging precision scale controller- Magnum Systems Weigh Contoller | USD 1,200.00 | Digital weigh scale controller for weighing accuracy before packing | |
| APS Autobag HS-100 Excel Automatic Bagger | PI-4000 In-Line Printer | USD 4,950.00 | Automatic bagger with integrated thermal transfer printer | |
| Autobag HS-100 Excel Automatic Bagger | PI-4000 In-Line Printer | USD 4,000.00 | Same bagger/printer configuration at a lower listed price |
Decision Matrix
- Bottle-heavy beverage, pharma, or cosmetics line: the steam shrink labeling machine fits after filling, with shrink support for PVC, PET, PP, and PA films.
- High-speed bagging with on-bag barcodes: the Autobag HS-100 Excel system is the choice when you need bags filled, sealed, and printed in one continuous step.
- Weigh-before-packaging upgrade: the Magnum Systems Weigh Controller is a digital weigh scale controller that can be integrated into an existing packaging line where weight accuracy is the missing step.
Product Notes
Automatic Steam Shrink Labeling Machine 220V 3PH with Boiler
This new station is the only listing that covers the shrink-labeling step. It runs as a straight-line machine with a 24KW steam generator, supports PVC, PET, PP, and PA films, and is built with SUS304 stainless steel. Choose it when your bottles need a smooth, wrinkle-free sleeve finish and you have the floor space for a dedicated 180cm-by-81cm-by-171cm machine. The limitation is that it is a specialized labeling system, not a bagging or weighing unit, so it only earns its place on a line that actually needs shrink labeling. Its 220V three-phase power requirement means the downstream integration plan has to include that electrical supply.
Magnum Systems Weigh Controller
The Magnum Systems Weigh Controller is a used digital weigh scale controller and the smallest-scope option in this group. It is built for accurate weighing and control as part of a packaging line. Pick it if you already have bagging and labeling equipment but need to add a precise weighing step before products move downstream. The limitation is that it is a controller, not a complete bagger or labeler, so it won't solve throughput problems on its own. It is also the only option here that is a component rather than a whole station.
APS Autobag HS-100 Excel Automatic Bagger
This used Autobag system pairs the HS-100 Excel bagger with an integrated PI-4000 thermal transfer printer, so bags are printed as they are filled and sealed. The listed capabilities include 70 bags per minute, 30 job pre-sets, an RS-232-C serial interface, an 80 psi air requirement, bag lengths from 3 to 22 inches, widths from 3 to 10.5 inches, and film thicknesses from 1.5 to 4.0 mil. Choose it if you need an all-in-one bagging-and-printing cell. The limitation is that this listing carries a higher listed price than the other Autobag listing.
Autobag HS-100 Excel Automatic Bagger
The lower-priced Autobag listing offers the same described HS-100 Excel bagger and integrated in-line printer, with the same bag length, width, and film ranges and the same 30-job memory. The practical advantage is that you get the same bagging-and-printing functions for less than the other Autobag listing. The limitation is that the two listings are so similar that the buying decision rests on the USD 950 price gap rather than on any feature difference.
Final Recommendation by Use Case
- For bottle-heavy lines: the Automatic Steam Shrink Labeling Machine 220V 3PH with Boiler is the direct fit when you need shrink-sleeve labeling after filling; its 24KW steam generator and SUS304 construction are the standouts.
- For an existing bagging or labeling line: the Magnum Systems Weigh Controller adds the missing weighing step at the lowest listed price in this group.
- For high-throughput bagging with printing: the Autobag HS-100 Excel system is the one to build around. Between the two listings, the lower-priced Autobag HS-100 Excel system offers the same described bagging-and-printing functions for less, making it the easier call on listed price and features.
